Forum
No internet connection
  1. Home
  2. WISE-PaaS/DataHub

Comments for DataHub

By System @system2020-07-20 02:12:09.293Z2020-08-21 03:36:18.436Z
  • 14 comments
  1. K
    Kenny Chen @Kenny2020-07-20 02:12:09.421Z

    百度 提取碼: 8h5i 連結失效了

    1. Stanley Yeh @adv.stanley2020-07-20 02:18:31.138Z

      經查,現在訪問繁/簡/英三個語言的頁面都是正常的,再麻煩您試試看。

      1. In reply toKenny:
        @wisepaas.training2020-07-20 03:55:51.934Z

        應該是台灣IP被百度ban掉了, 可以參考下面網頁
        https://mrmad.com.tw/buidu-pan-blocks-404-taiwan

      2. E
        In reply tosystem:
        Eric Tsai @eric2485502021-06-30 08:32:38.022Z

        使用python sample code有幾個問題想請問

        1. python 的sample code並沒有 send loop 的功能
        2. 第一次upload config之後不管是delete devices還是delete all config 時間跟數值都是原來一開始給的值
        1. YYien Liu @Yien_Liu2021-07-01 03:01:14.868Z

          您好,
          1.Python Datahub Edge SDK 點選【Send Data】即會以您在【Data Frequency】中設定的秒數不斷上傳資料。

          2.【upload config】 跟【delete config】皆需在connect的狀態下進行,
          首先先確認是否與您欲新增的Node中是否已有使用SDK建立的預設範例裝置(預設名稱為Device 1),
          若有該範例裝置,點選【Delete All Config】,清除該Node中所有裝置測點,並點選【Upload Config】重新上傳範例裝置與測點之設定。
          若無範例裝置,則直接點選【Upload Config】上傳裝置與測點設定。
          點選【Send Data】即可上傳最新數據。

          1. EEric Tsai @eric2485502021-07-02 07:19:46.258Z

            您好,
            我錄製了影片來說明問題

            1. python SDK send data沒更新資料和時間
              https://www.youtube.com/watch?v=sgiiIac27kc
            2. python SDK delete all coonfig 後時間維持一樣
              https://youtu.be/Nnh1hPAyhRc
            1. YYien Liu @Yien_Liu2021-07-02 09:36:59.657Z

              因為您所使用的空間原有Datahub版本2.0.8,幫您升級至最新2.0.14後,資料就可以正常顯示了,在麻煩您試看看。

              1. EEric Tsai @eric2485502021-07-02 10:18:39.458Z

                功能恢復正常,謝謝!

        2. H
          In reply tosystem:
          HOÀNG Hiep @hiep_cbla52021-07-18 16:09:46.546Z

          Hello, I have a question.
          Why I can't connect to Node event I have write correct url, Credentinal Key and NodeID. I created my node with GateWay Optine and 64 MiB storage. Thanks for advice

          1. S@sk_chen2021-07-19 07:53:09.834Z

            Hi

            In order to facilitate the processing of your question, please provide the following information

            1. Which method (WebAccess, edge sdk, edgelink, mqtt) do you use to connect to datahub

            2. Or provide the datahub URL, and the name of the project and node that you cannot connect to

            1. HHOÀNG Hiep @hiep_cbla52021-07-20 13:42:40.522Z

              Hello, Thanks for reply my question.
              As picture below, I have connect to datahub with edge sdk, I have tried to Upload Config but the Node doesn't create any device and Tag inside.

              My Node Id: f5155d27-1b93-47a0-8c6a-41b398fd9ddb.
              Credential Key: 53d2521f09c45c4aaf2a0d2b8becc8um
              API URl: https://api-dccs-ensaas.education.wise-paas.com/

              1. S@sk_chen2021-07-21 08:29:25.497Z

                Hi
                can not find your project

                1. HHOÀNG Hiep @hiep_cbla52021-07-21 12:43:32.501Z

                  Hi.
                  Is there any problem with Url: https://portal-datahub-cxnam-ews.education.wise-paas.com/ . My friend also has same error.

                  Below is My Test Project.

                  1. YYien Liu @Yien_Liu2021-07-23 05:51:22.510Z

                    The issue should be solved, thanks.