# Business Topology Node Configuration Not Displayed (Non-Instrumentation Topology)

**URL:** <https://forum.wise-paas.advantech.com/t/business-topology-node-configuration-not-displayed-non-instrumentation-topology/1586>\
**Category:** ECOWatch/HVAC\
**Tags:** InsightAPM, ECOWatch\
**Created:** [June 16, 2025, 2:14am UTC](https://forum.wise-paas.advantech.com/t/business-topology-node-configuration-not-displayed-non-instrumentation-topology/1586 "2025-06-16T02:14:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jacey\_xiao](https://avatars.discourse-cdn.com/v4/letter/j/c89c15/32.png) [@jacey\_xiao](https://forum.wise-paas.advantech.com/u/jacey_xiao)\
**Post date:** [June 16, 2025, 2:14am UTC](https://forum.wise-paas.advantech.com/t/business-topology-node-configuration-not-displayed-non-instrumentation-topology/1586/1 "2025-06-16T02:14:28Z")

</div>

If you want a certain node in the business topology not to appear on the frontend, you can mark that node with the label `"virtual-meter"`.

This way, the node will not be shown in the frontend topology view. The steps are as follows:

1. Open **InsightAPM → Asset Group Management →** select a business asset group, click to enter, then select a specific node (e.g., **Meter2** ) as shown in the image below.
2. Double-click the node (e.g., **Meter2** ), rename its description to `"virtual-meter"` and save it.  
 ![image](https://canada1.discourse-cdn.com/flex032/uploads/wisepaasforum/original/1X/d221a4ce40977298e974c72ac5d4d7bf29cfcb03.jpeg)

**Note:** The `"virtual-meter"` label method currently only applies to nodes in business asset groups. It is not yet supported for meters in instrumentation asset groups. This will be optimized in future versions.